Altronic The Game of Life, Set Up And Configuration

Page: 15 / 57

15
May 2007
The Game of Life™ / Setup and Configuration (APL based)
COMMBOARD SETUP
Optional Settings
These settings are optional to enable communication
to an online system.
Communication to an online system via a slot machine
interface board (SMIB)
These settings apply, if the commboard is connected
to an Atronic Systems MDC (Machine Data Controller)
or a similar slot machine interface board (SMIB) which
provides the accounting system address. In this case
it is not necessary to set a unique accounting system
address on the commboard.
1.
Set S5 /6 to ON
This enables communication to an online system in
general.
2. Activate SAS Channel 1.
Set rotary switch S7 to "1"
This enables communication on SAS channel 1 on
commboard connectors P12 (RS-232 interface) and
P2 (TTL interface).
3. Optional:
Close jumper B1 on the commboard.
This shortcuts digital ground on commboard
connector P12 to electrical ground.
You may use this option to enhance signal quality, if
the connected interface device provides galvanic
isolation of ground connection.
Note:
See appendix for a commboard
connectors layout.
S
ETUP
Note:
Close jumper B1 if you use an
Atronic Systems MDC.