background image

O & C M A N U A L   # 8 3 1 1   •   T H / I I I   F A M I L Y  

P G .   1 3

S E C T I O N   5

U S E R   O P T I O N S

S E C T I O N   5

I.  Preset Keys Lock and Unlock

Preset Keys A through H can be locked in order to
prevent storing, altering or erasing a program.

To lock the preset keys, 

press and hold

the "I" Key

for four seconds.  Oven will beep.  Release the “I”
key.  The green indicator on the "I" key will illuminate.
Oven Preset Keys A through H are now locked.

Note:  

Only the oven Preset keys A through H are
affected by this lock-out in order to also allow
the oven to be used with the unprogrammed
Cook, Probe, or Hold modes.

To unlock the preset keys, 

press and hold

the Cancel

Key along with the "I" Key for four seconds.  You
will hear a brief beep.  Release all keys.  The green
indicator on the "I" key will extinguish.  The oven
preset keys are now unlocked.

Control Panel Lock and Unlock

The control panel can be locked at any time in order
to prevent inadvertent or accidental setting changes.

To lock the control panel, 

press and hold

the Up

Arrow Key and then press the 

ON

/

OFF

Key.  You will

hear a brief beep and the panel lock indicator will
illuminate.  Release all keys.  The oven's 
control panel is now locked.

Note:  

The control panel is now fully locked with the
exception of the 

ON

/

OFF

Key and Arrow keys.

You will be unable to turn the oven control off
at this point.

To unlock the control panel, 

press and hold

the

Down Arrow Key and then press the 

ON

/

OFF

Key.

You will hear two brief beeps and the panel lock
indicator will extinguish.  Release all keys.  The
panel is now unlocked and ready for normal use.

Lock

Indicator

PRESETS

A

B

C

D

E

F

G

H

I

CANCEL

Preset

Lock

Cold food for rethermalization or reheating

must never be added to the oven 

while hot food is being held.

Summary of Contents for 1000-TH/III
































Reviews: