background image

O & C M A N U A L   # 8 3 1 1   •   T H / I I I   F A M I L Y  

P G .   1 2

S E C T I O N   5

U S E R   O P T I O N S

S E C T I O N   5

D.  Fahrenheit or Celsius Selection

With the control in the 

off mode

press and

hold

the Up Arrow Key along with the

Preset "D" Key for two seconds.  Oven will
beep.  The display  will indicate the 
temperature scale selected.

E.  Language Choices

To change the language that the oven uses for print-
ing to a printer or PC terminal, with the control in
the 

off mode

press and hold

the Up Arrow Key

along with the Preset "E" Key for two seconds.  Each
time you press this key combination you will hear a
brief beep and the oven will print the next available
language.  Continue pressing this key combination 
until you have reached the language you desire.  
The languages available are English, French, German
and Spanish.

F.  Printing Reports

To print summaries of previous cooking programs 
to a printer or PC terminal, 

press and hold

the Up

Arrow Key, along with the Preset "F" Key for two 
seconds.  You will hear a brief beep and the oven
will print summaries of the last seven cooking
sequences.  You cannot print report summaries if the
oven is currently in on-line printing during a cook-
ing sequence.

G.  On-line Printing

On-line printing allows you to print a running
record of time, probe temperature and mode during
oven operation to a printer or PC terminal.  With the
control in the 

off mode,

toggle between on-line and

off-line status by 

pressing and holding

the Up

Arrow Key along with the Preset "G" Key for two
seconds.  One brief beep indicates that you are now
in the on-line printing state.  Two beeps indicates
the off-line printing state.  A status message will be
printed indicating the change to on-line printing.
"On-line 1" indicates that samples will be taken at
one minute intervals.  "On-line 5" indicates a five
minute interval between samples.

H.  On-line Printing Intervals

You are able to control the time interval at which
the on-line data is recorded.  You can set the inter-
vals at one minute or at five minutes.  Regardless of
the interval you select, the oven will always print at
ten minute intervals while in Preheat, Ready Start
mode and after 121 minutes in the Hold mode.  With
the oven in the 

off mode,

toggle between the one

minute or five minute interval choice by 

pressing

and holding

the Up Arrow Key along with the

Preset "H" Key for two seconds.  One brief beep
indicates that samples will be printed in one minute
intervals.  Two beeps indicates printing in five
minute intervals.

C.  Beeper Volume Selection

With the control in the 

off mode

press and hold

the Up Arrow Key along 

with the Preset "C" Key for a minimum of four 
seconds.  Oven will begin to beep in varying tones.
Release both keys when the desired volume is reached.

PRESETS

A

B

C

D

E

F

G

H

I

CANCEL

Beeper
Volume

°C/°F 

Selection

Reports

Sample
Rate Interval

Language 

Choices

Online

Preset

Lock

Summary of Contents for 1000-TH/III
































Reviews: