Programmable Control Panel
Altimium 17 www.altimium.com
3)
The send port must be selected as the same as model setting, otherwise the
event cannot be added.
4)
The IR can set the carrier on/off, to turn on/turn off the IR sending.
I/O Setting
There is no I/O port in the CP8N, so the setting is not introduced in this manual.
Relay Setting
This item is for the replay ports setting. The setting is as the picture below:
Delay setting
This item is to set a delay time, user can add a delay between two events; so when
one event is finished, it will delay a certain time then start another event. The delay
setting is as picture below:
Send
Type
Port Action:
“On”
for connected,
“Off”
for disconnected.
