Programmable Control Panel
Altimium 15 www.altimium.com
Notice:
When editing finish, remember to save the editing, and then press
“OK”.
2) There are two send types: send once and send more times. When select
“more
times
”, the send times and the delay between times can be set. See in picture
below:
3) The send port must be selected as the same as model setting, otherwise the event
cannot be added.
4) User can set the event name. It is optional function, not necessary.
IR Setting
This item is used for setting the parameters of the CP8N
’s IR ports. Click “IR”, it will
show as below:
Enter the serial command for device control.
Create/delete the function
name of the command
Create/open a library
