Programmable Control Panel
Altimium 10 www.altimium.com
The output port set in PS-WP and the port used in the CP8N is corresponding. And
there are four output types. They are showed as below
form (“√” means port is
available):
Output port of
the Panel
Output mode
of PS-WP
IR1
RS23
2
(1
)
IR2
RS23
2
(2
)
IR3
RS23
2
(3
)
RS48
5
RS232(1)(2)
√
√
√
√
√
RS232(2),IR2
√
√
√
√
RS232(1),IR3
√
√
√
√
√
IR2,3
√
√
√
√
3)
Connection type: the instructions are in the picture below:
1
：
Com, connect by serial port.
2
：
USB, connect by mini USB.
3
：
Disconnect, disconnect the
connection.
4
：
Upload: upload the programmed
data to the programmable
control panel. It will clear all the
old data in the programmable
control panel.
5
：
Clear, clear the data in the
programmable control panel.
