Programmable Control Panel
Altimium 13 www.altimium.com
loop function, the ID must be set, the ID can be 1 to 99. Press
“add” will add the
button to action list.
3.
Yellow Keys: Keys 33-36, all are virtual keys. Key 33 and 34 are for I/O control,
which is not supported with the CP8N. Key 36 is a start action, if add events to
this action, when the CP8N is power on, it will execute the events in this action.
Key 35 is delay button, there are three time slots can be set. See in the picture
below:
The time is counted from the CP8N start. When come to time1, the CP8N will execute
the events in time1. Then recount from time2, and then time3.
Example: Set time1 to 5 minutes, and time2 to 3 minutes, add event1 to time1 and
event2 to time2. When the unit starts, it will execute event1 after 5 minutes, and then
execute event2 after 8 minutes.
4.2.3 Action list
Action list shows all the set actions. An available action must be added to the list. The
action list is as the picture below:
