Programmable Control Panel
Altimium 14 www.altimium.com
4.2.4 Event setting
Event setting includes RS232, IR, I/O, Relay, Delay, Compare, LED, Page, Loop and
Toggle setting. Before set events, an action must be added first. The following
introduction will show you the setting of each event:
RS232 Setting
This item is used for setting the parameters of the CP8N
’s serial ports. Click “RS232”,
it will show as below:
1) The data of RS232 can be directly entered or selected from library. Click
“Change
Lib
” to select a library file and open it. Click “Edit Lib” to create or edit a library file
as below:
Send
Type
Send
Port
Delete a
selected action.
Refresh, delete all the
actions that with no event.
Delete all actions.
