Altigen MaxCommunicator, Manual

Page: 29 / 93

MaxCommunicator Manual 23
Ge
tting St
a
rte
d
• Remove the dialer field by right-clicking a toolbar button and
choosing Customize Toolbar Buttons, as above. In the Toolbar
Customization dialog box, clear the check box beside Show Dialer. To
display the dialer again, check the Show Dialer check box.
• Pop up MaxCommunicator when you have incoming calls. Pop ups
work when MaxCommunicator is minimized or is a strip at the top or
bottom of the window but not when you have exited. See “Call Alert
Options” on page 66.
• Drag and dock the tabs by dragging the dotted area above them to the
right arrow, the left arrow or the bottom arrow. Once you start moving
the group of tabs, the arrows appear. Move the cursor to an arrow, and
the tabs will be docked at the side you selected.
• Drag and dock one tab by dragging it by its tab until the cursor is on
the arrow where you want the tab to dock.
• Make a tab a separate window independent of the
MaxCommunicator main window by dragging it out by its tab, or by
double-clicking the tab. Then you can resize the window and move it
around.
To dismiss the window, click the close button in the upper right corner.
To return the window to the set of tabbed pages, drag it by its title bar
to the tabs area.
When the docking arrows appear, they look like this
Dragging and docking tabs
A tab is being dragged from an independent window back
to the tabs group.