18
To Set up:
Insert stereo patch lead into the output (2) of the BT Pro LCD unit.
Insert the other end into the input of the blue TMS device.
Insert the Magnastim Headset into the “Headset” output on the blue TMS device.
Plug the 12 volt power supply into the blue TMS and plug into mains power to operate.
BE SURE TO USE ONLY THE POWER SUPPLY THAT CAME WITH EACH DEVICE!
Do not mix the power supplies up as some devices require different voltage power.
The TMS device acts as an amplifier that sends the frequencies to the Headset electrodes.
Please note that these are not headphones. A magnetic frequency is emitted from the
electrodes.
Sit or lie in a comfortable position and fit the headset over your ears.
Select the desired TIME by scrolling up/down, press SELECT to program this.
Select the desired frequency by scrolling up/down, press SELECT to program this.
Turn the intensity up to half or 3/4 (50%-75%).
The unit will switch off automatically after the timer has counted down.
Magnastim Headset
Stereo Patch Cable
12volt Power Charger
