28
SCHM: (Sacred Harmony)
Another very popular and user friendly program.
Sacred Harmony frequencies represent the Earths’ natural energy grid frequencies and are
closely related to musical harmonic frequencies. The built in frequencies of the Sacred Harmony
are:
UT: 396 Hz
RE: 417 Hz
MI: 528 Hz
FA: 639 Hz
SOL: 741 Hz
LA: 852 Hz
Schumann: 7.83 Hz.
Set up:
Connect the Magnacoil as instructed on Page 20.
Switch power on (11) and press up/down arrows to select “SCHM”, press SELECT (7) to
begin the program.
The output is a bi-polarity equal square waveform. Each step, will display correspondent
output frequency. Press the UP button to raise the intensity to 75-100%.
Each frequency will run for three (3) minutes and move to the next and then it will repeat
continuously.
This program has no timer control and will run non-stop until actively
switching the unit off to cease the function.
If you wish to run just one frequency pressing SELECT during this sequence will pause the
timer but run the chosen frequency continuously. The timer will pause and flash during this.
By pressing SELECT again this will begin the timer again but on the next frequency in se-
quence.
You must switch off the unit manually as there is no timer control in
Sacred Harmony mode.
