27
TENS: (Transcutaneous Electrical Nerve Stimulation)
TENS has two sub programs: P_1 and P_2.
P-1
: Dual polarity pulse output in 100Hz frequency. Pulse width changes from 200us to 100us
in every 3 seconds cycle on 6 steps. 200-184-167-150-134-117-100us and repeat.
P-2
: Dual polarity pulse output in 100Hz and 2Hz. Pulse width changes from 200 us to 100 us
in about every 6 seconds cycle. Two frequencies changed over when current cycle finished.
Setup:
Turn power on, press up/down buttons until “TENS” is selected, press SELECT (7) to confirm.
Select the desired running time by pressing the UP/DOWN button from 5-100 minutes, press
SELECT (7) to program.
Then select program “P_1” or “P_2” by press UP (10) / DOWN (9) pressing SELECT (7) will
enter this and the program will begin.
Press the UP button to raise the intensity to a suitable level.
The unit will automatically switch off after set program has finished.
T.E.N.S. Pads:
Please note:
Before placing adhesive pads, make sure the skin is clean and free from dirt or grease.
Place in the positions shown above or place at either end of muscles for muscular pain.
