Altera DE2 Board, Getting Started Manual

Page: 27 / 85

Using the System
24
3-8
Using the Expansion Headers
The DE2 Board provides users two 40-pin expansion headers. Each header
provides DC +5V (VCC5), DC +3.3V (VCC33), two GND pins for users to build
their own daughter cards using the DE2 expansion ports.
Figure 3.10 shows the related schematics. The pin assignment of the associated
interface is shown in Table 3.8.
Figure 3.10 Two 40-pin Expansion Headers
Signal Name FPGA Pin No. Description
GPIO_0[0] PIN_D25 GPIO Connection 0[0]
GPIO_0[1] PIN_J22 GPIO Connection 0[1]
GPIO_0[2] PIN_E26 GPIO Connection 0[2]
GPIO_0[3] PIN_E25 GPIO Connection 0[3]
GPIO_0[4] PIN_F24 GPIO Connection 0[4]
GPIO_0[5] PIN_F23 GPIO Connection 0[5]
GPIO_0[6] PIN_J21 GPIO Connection 0[6]
GPIO_0[7] PIN_J20 GPIO Connection 0[7]