Altai Technologies Ltd. All rights reserved
C1n Series WIFI AP/CPE Web-admin Configuration Manual
TPS15-003_rev1.3
Managed Radio
: Specify the Radio0 can managed by AC.
Creat Manage Wlan Switch
: Specify whether create manage WLAN on thin AP. If
create a manage WLAN, When thin AP is disconnected to AC, User can also
manage this thin AP through manage WLAN.
WLAN Change Action
: When the thin AP is disconnected to AC, It can close all WLAN
or Tunnel WLAN.
Configure the thin AP Mode:
1
Enable VLAN
via
Configuration
->
Network
->
VLAN
2
Select
Configuration
->
Thin AP
3
Check
Enable Thin AP
to enable C1n thin AP mode.
4
Specify the primary AC IP address in
Primary AC Address
5
Specify the Secondary AC IP address in
Secondary AC Address
6
Specify the
AP Name
when it’s needed
7
Specify the
AP Location
when it’s needed
8
Select
AC debug level
when it’s needed
9
Specify the
Managed Radio
of C1n
10
Check the
Create Manage Wlan Switch
if necessary
11
Select Close All WLAN or Close Tunnel WLAN When the thin AP is disconnected to
AC
12
Click
Submit
13
Click
Save&Apply
to apply
Notice: When C1n enables DHCP client, it supports DHPC Option 60 in both IPv4 and
IPv6. Administrator can specifies a DHCP Option 60 string up to 32 characters.
