Altai Technologies Ltd. All rights reserved
C1n Series WIFI AP/CPE Web-admin Configuration Manual
TPS15-003_rev1.3
Figure 5-50 Bridge Mode
Enable Radio:
Enable or disable Radio0.
Radio Mode
: Operation mode of Radio0; It can be configured as AP, Station,
Repeater and Bridge.
Country Code
: Specify country that C1an locates. This setting is related about radio
regulatory domain, such as maximum transmission power, available operating
frequency channel … etc. Hong Kong is default setting.
Wireless Mode
: Specify wireless mode of C1an; User may configure the WLAN
standard and channel bandwidth via this option. By default, it is 5GHz 130Mbps
(802.11na HT20).
Radio Frequency
: Specify the operating frequency channel.
Transmit Power
: Specify the maximum transmission power (dBm) of C1an radio0.
Configure C1an radio0
as “Bridge” Mode
:
1
Select
Configuration
->
Wireless
->
Radio0
->
General
2
Check
Enable Radio
to enable radio0 if necessary.
3
Select to “Bridge” in
Radio Mode
4
Select your country code in
Country Code
5
Select desire wireless mode in
Wireless Mode
6
Select operating channel in
Radio Frequency
7
Set maximum transmit power in
Transmit Power
8
Click
Submit
9
Click
Save&Apply
to apply
