Altai Technologies Ltd. All rights reserved
C1n Series WIFI AP/CPE Web-admin Configuration Manual
TPS15-003_rev1.3
Enable Roaming
: When enabled, station performs channel scanning and roams to
other AP with better SNR based on specified scanning & roaming parameters;
otherwise, it never performs channel scanning and associates with the other AP if the
current connection is broken.
Scan SNR threshold
: Station performs channel scanning if the SNR of received signal
from associated AP is worse than this threshold, (0-100dB, default value is 35).
Scan SNR Threshold must be larger (>) than Roaming SNR Threshold
.
Roaming SNR threshold
: Station triggers the roaming if the SNR of received signal from
associated AP is less than this threshold. (0-100dB, default value is 30).
Max Scan Interval
: Specify the maximum duration for channel scanning.
(1-3600s,
default value is 60s).
Min Scan Interval
: Specify the minimum duration for channel scanning. (1-60s, default
value is 10s)
Scan SNR Fluctuation Threshold
: When the SNR of remote AP change in value
exceeds the threshold setting here within
Min Scan Interval
, Radio0 will start
background scan.
Wireless Mode Weighting
:
When enabled, station will be more stickier to current associated
AP.
Bgscan Channel
: Specify the particular channel for scan. Radio0 will scan all
channels if no channel is checked.
Configure C1n to associate with specified remote AP:
1.
Select
Configuration
Wireless
Radio0
Station
to click “
More…
” behind the
WLAN0.
2.
Check
Lock AP Mac
if necessary. User should also input the MAC of remote AP in
Remote AP Mac
.
3.
Set remote AP’s SSID in
Remote SSID
or click
[Scan]
to find remote AP in the
surrounding area.
4.
Set up to 3 preferential MAC addresses of remote AP in
Preferred AP0/AP1/AP2
MAC
if necessary.
5.
Check the
Enable MAC Clone
if necessary, user should also select
MAC Clone
Type
.
6.
Check the
Enable Roaming
if roaming is needed.
7.
Set varies value about roaming:
Scan SNR threshold
,
Roaming SNR threshold
,
Max Scan Interval
,
Min Scan Interval
,
Scan SNR Fluctuation Threshold
,
Wireless
Mode Weighting
,
Roaming Hysteresis Level
, and
Bgscan Channel
.
