Altai Technologies Ltd. All rights reserved
C1n Series WIFI AP/CPE Web-admin Configuration Manual
TPS15-003_rev1.3
Figure 3-4 Internet Protocol (TCP/IP) Properties in Windows XP
3.2.
Check Access
“
ping
” utility of Command Prompt is a handy tool to check the access to the C1n
Series AP/CPE.
1.
Go to the Command Prompt by typing “cmd” in “
Run
”.
2.
Type command:
ping 192.168.1.222
The C1n Series AP/CPE shall respond to your ping request if C1n Series AP/CPE and
your PC have a correct connection.
NOTE:
Using the same PC to ping different C1n Series AP/CPE may cause ping failure.
This is because C1n Series AP/CPE has the same default IP address
but different MAC
addresses
. You need to type command “arp –d” in Command Prompt to clear ARP
table on PC before each ping.
3.3.
Configuration with Web-Admin
The C1n Series AP/CPE can be accessed through a Web Browser, for example,
Internet Explorer (IE).
1
Open an IE session and type the IP address of the C1n Series AP/CPE.
Example: http://192.168.1.222 or https://192.168.1.222, where 192.168.1.222 is
the C1n Series ’s IP address. The
default IP Address
is
192.168.1.222
.
