Altai Technologies Ltd. All rights reserved
C1n Series WIFI AP/CPE Web-admin Configuration Manual
TPS15-003_rev1.3
Figure 5-12 WAN/LAN Interface Assignment
Ethernet/Radio0
: Specify Ethernet, Radio0 as either LAN interface or WAN interface, it
is only available in gateway mode.
Enable NAT Mode
: If NAT Mode is set as "disable", the AP will not perform any network
address translations on all traffics. The traffics that passed from the wireless clients to
the DS (Ethernet) port or wireless bridge (802.11a radio) is not modified. If NAT Mode is
set as "enable", the AP will perform network address translations on all traffic. AP
translates IP address between the wireless client subnet and the DS subnet for the
traffics that passed from the wireless clients to the DS (Ethernet) port or wireless bridge
(802.11a radio). This option is only available in gateway mode.
6)
LAN Setting (IPv4)
