Altai Technologies Ltd. All rights reserved
C1n Series WIFI AP/CPE Web-admin Configuration Manual
TPS15-003_rev1.3
show
t: Specify Whether shows the accounting radius server’s secret information.
Configure a WLAN with either WPA/WPA2/WPA-auto security:
1.
Select
Configuration
Wireless
Radio0
WLAN
to edit “
More…
” behind the
WLAN, and then select
WLAN Security
to access to security configuration page.
2.
Select “WPA”, “WPA2” or “WPA-auto” in
Authentication Mode.
3.
Select suitable cipher mode in
Cipher Mode
. If
Authentication Mode
is set as
“WPA2”, “AES” is the only option. If
Authentication Mode
is set as “WPA-auto”,
“AES+TKIP” is the only option.
4.
Specify update time of group key in
Group Key Update Interval
. The default
value is 86400s
5.
Specify network access server’s ID in
NAS Identifier
if necessary.
6.
Specify connection timeout in
RADIUS Retry Timeout
. The default value is 300s
7.
Set Radius server IP address in
Radius Server
8.
Set Radius server port in
Radius Port
9.
Set Radius secret in
Radius Secret
10.
Set Secondary Radius server IP address in
Secondary Radius Server
if
necessary
11.
set Secondary Radius server port in
Secondary Radius Port
if necessary
12.
set Secondary Radius server secret in
Secondary Radius Secret
if necessary
13.
Specify accounting interim interval in
Accounting interim interval
. The default
value is 300s
14.
Set Radius accounting server IP address in
Radius Accounting Server
15.
Set Radius accounting server port in
Radius Accounting Port
16.
Set Radius accounting secret in
Radius Accounting Secret
17.
Set Secondary Radius accounting server IP address in
Secondary Radius
Accounting Server
if necessary
18.
set Secondary Radius accounting server port in
Secondary Radius Accounting
Port
if necessary
19.
set Secondary Radius accounting server secret in
Secondary Radius
Accounting Secret
if necessary
20.
Click
Submit
21.
Click
Save&Apply
to apply
NOTE:
TKIP causes bad performance on 802.11n network.
