Alpinespas SPA POOL, Manual

Page: 8 / 96

8
3. IMPORTANT OPERATING INSTRUCTIONS
DO NOT leave the spa pool empty and exposed to direct sunlight without it’s cover
- doing so may damage the acrylic.
DO NOT power the spa pool without first filling with water.
DO NOT allow the water level to fall below the filter/skimmer box. The water level
should be kept in line with the perimeter LEDs or at least 50mm above the bottom
of the skimmer box at all times.
DO NOT allow any persons to place their head under the water.
DO NOT roll or slide the spa pool on its side.
DO NOT use any chemicals or water balancing products in the spa pool, other than
those sold by Alpine Spas Ltd, PureSpas Ltd or Spa Supplies Ltd.
FAILING TO READ AND UNDERSTAND THE BELOW
INSTRUCTIONS MAY VOID YOUR SPA POOL WARRANTY.
DO ensure a water maintenance regime is used and followed regularly. Failing to
balance water or sanitize correctly can damage spa pool components and void
warranty. A guide is provided which should be followed carefully.
DO ensure the spa pool cover is placed on the spa pool and locked when not in use.
DO perform a regular spa pool cleaning schedule as instructed by this manual.
DO drain and refill your spa pool at least every 3-4 months or more frequently if
required.
DO ensure at least 4 hours of filtration is performed by the spa pool each day (this
is set as a default: 2 hours, twice per day).
DO ensure the spa pool cover is opened every few days for a few minutes (if
unused) to avoid build up of gasses under the cover.