Alpinespas SPA POOL, Manual

Page: 78 / 96

78
PRESSURE DIVERTER & AIR VENTURI VALVES
WATERFALL CONTROL
Pressure Diverter
Found on select models, turning this dial left/right will switch
the jet pressure from one side of the spa pool to the other.
For even jet pressure across all seats, leave the dial adjusted
to the middle position (50/50).
Air Venturi Valve
Turning these dials on will inject air flow into selected jets
to increase their pressure. You will notice the water stream
becomes aerated when functioning. The seat located
closest to the dial is usually the one to receive the boost. We
recommend to turn off these valves when you exit the pool.
Waterfall Behaviour
As long as the dial is turned on, water will flow from the
waterfall or fountains when the spa pool is heating and/or
filtering OR anytime a pump is engaged.
Turning ON/OFF
Turn the waterfall dial anti-clockwise to open the flow of
water, clockwise to shut it off. Be EXTREMELY careful not
to over-twist and push the dial past the point of natural
resistance. If no water is flowing but the valve is open,
activate a pump to engage flow.
7. GETTING TO KNOW YOUR SPA POOL
AIR BLOWER
Air Blower Operation
The air blower is activated via the button on the topside
control panel. This will bubble air from the air-jets found in
the bottom of the spa pool.
NOTE:
Platinum dials and jets will have a slightly different appearance
(translucent plastic) as select pieces are back-lit with LED lights.