Alpinespas SPA POOL, Manual

Page: 20 / 96

20
5. STARTUP & REFILL PROCEDURE
BALANCING & SANITIZING THE WATER
Just like a car, your spa pool needs care and general maintenance to keep it looking good
and running smoothly.
An integral part of this maintenance is managing the water
quality.
To ensure your spa pool is ready to be used at all times, the water needs to be sanitized
and balanced to keep it clean and fresh.
You may have received a Water Care Startup Kit with your spa pool (please purchase one
if you have not). Follow the ‘
Water Care Handbook’
found in your iPack or download a
copy from our support page link at the bottom of this page.
Only use Alpine Spas, PureSpas or Spa Supplies approved products (including filter
cartridges) in your spa pool. Use of unapproved products may result in your warranty
becoming void, please contact us if in doubt.
FAILING TO BALANCE AND SANITIZE YOUR SPA POOL
CORRECTLY MAY RESULT IN CORROSION OR DAMAGE TO
COMPONENTS, WHICH IS NOT COVERED UNDER WARRANTY.
Download our ‘Spa Pool Water Care Handbook’ from our support
page: http://alpinespas.co.nz/support/
Your first steps in treating the spa pool water will require the use of the topside control
panel. See the quick reference guides on the following pages.