Alpinespas SPA POOL, Manual

Page: 34 / 96

34
7. GETTING TO KNOW YOUR SPA POOL
NOVA SPA POOL OVERVIEW
Components:
Spa Pool Controller SpaNet SV-SMART
Topside Control Panel SpaNet SV-SMART
Heater Element 3KW
Pumps Two-Speed Circulation / Jet Massage Pump (3HP)
Skimmer/Filter Type Floating Weir Filter
Sanitizers Ozone
Electrical Info 15amps 230 - 240V AC 50hz IPX5
Cable 15amp Cable Pre-Connected
Locating the Controller & Cable
Remove the cabinet panels from the side of the spa pool that houses the system
controller (see following page for exact location). Inside you will find the cable
coiled up.
BELOW DIAGRAM IS FOR SINGLE PHASE 15A AND IS ONLY
REQUIRED IF DISCONNECTING & RECONNECTING CABLE.
DIP SWITCHES DO NOT NEED ALTERING.
Cable & Wiring:
This 15amp spa pool includes a 4.5metre 15amp power cable that has been
pre-connected and installed onto the system controller.
To setup for high amp (25A, no load shed*) see page 15 for information.
PHASE (BRN/RED)
NEUTRAL (BLU/BLK)
GROUND (GRN/YLW)
MAINS
P
N
DO NOT POWER THE SPA POOL BEFORE IT HAS BEEN FILLED