The provided sauna heater must be installed by a registered electrician. No wiring,
switches, RCD or electrical accessories are included.
Heater Model
Sawo Sauna Heater 4.5kW - Model SCA-45NB.
Setup
Install the heater as per the manufacturer instructions included, along with any
electrical protective devices . The heater is to be mounted near ground level on the
‘back wall’ and surrounded by the provided wooden heater fence.
Cable for the heater can be fed through the back of the sauna through the provided
pre-drilled hole (see image below).
For single phase installations, lines 1, 2 and 3 should be looped together with phase into
L1 per the diagram below.
ELECTRICS - HEATER
POWER CABLE HOLE
FOR HEATER
OVERVIEW
SAWO HEATER SINGLE PHASE WIRING
To wire single phase cable into the Sawo Sauna Heater, lines 1, 2 and 3 should
be looped together, with phase into L1 per the diagram below.
Contact our Technical department for assistance if required - 0800 99 33 88
BACK PANEL
3
4