19
-EN
Sound Setting
Adjusting Bass/Treble/Balance (Between Left
and Right)/Fader (Between Front and Rear)/
Defeat
1
Press
Rotary encoder (MODE/LOUD)
repeatedly
to choose the desired mode.
Each press changes the modes as follows:
BASS
→
TREBLE
→
SUBWOOFER
*
1
→
BALANCE
→
FADER
→
DEFEAT
→
VOLUME
→
BASS
Bass Level: –7 ~ +10
Treble Level: –7 ~ +7
Subwoofer : 0 ~ +15
Balance : L15 ~ R15
Fader : R15 ~ F15
Defeat : ON/OFF
Volume : 0 ~ 35
• If the
Rotary encoder
(MODE/LOUD)
is not pressed within 5
seconds after selecting the BASS, TREBLE, BALANCE, FADER,
DEFEAT or SUBWOOFER mode, the unit automatically returns to
normal mode.
*
1
When the subwoofer mode is set to OFF, its level cannot be
adjusted.
2
Turn the
Rotary encoder
until the desired sound
is obtained in each mode.
By setting Defeat ON, previously adjusted settings of
BASS and TREBLE will return to the factory defaults.
• Depending on the connected devices, some functions and display
indications do not work.
g
f
BAND
Rotary encoder
(MODE/LOUD)
CENTER f.
Setting the Bass Control
You can change the Bass Frequency emphasis to create your own
tonal preference.
Press
CENTER f.
to select the BASS (bass Center
frequency) control mode.
BASS
→
TREBLE
→
normal mode
→
BASS
Setting the Bass Center Frequency
Press
g
or
f
to select the desired bass center
frequency.
60Hz
↔
80Hz
↔
100Hz
↔
120Hz
↔
60Hz
Emphasizes the displayed bass frequency ranges.
Setting the Bass Band width (Q-Factor)
Press
BAND
to select the desired bass band width.
Changes the boosted bass band width to wide or narrow.
A wide setting will boost a wide range of frequencies
above and below the centre frequency. A narrower setting
will boost only frequencies near the centre frequency.
Setting the Bass Level
Turn the
Rotary encoder
to select the desired bass
level (–7~+10).
You can emphasize or weaken the bass frequency.
• If no operation is performed within 15 seconds, the bass control
setting will be turned off automatically.
• The bass level settings will be individually memorized for each
source (FM, MW (LW), CD, etc.) until the setting is changed. The
bass frequency and bass band width settings adjusted for one
source are effective for all other sources (FM, MW (LW), CD etc.).
• Depending on the connected devices, some functions and display
indications do not work. However, Bass Level is still adjustable if
an audio processor with the Bass function is connected.
• This function is inoperable when DEFEAT is set to ON.
......................................
→
1
→
2
→
3
→
4
(Narrow)
←
→
(Wide)
Summary of Contents for DVA-9860R
Page 64: ......
