42
-EN
SMS (Short Message Service) Operation
You can receive messages, show the contents of messages, and send
standardized sentences.
When a message is received, an icon is indicated on the display.
Receiving a Short Message
1
Press the
Rotary encoder
for more than 2
seconds.
The Speed Dial display appears.
2
Press
7
(
RETURN
).
The Telephone menu display appears.
3
Press
5
(
SMS READ
).
The SMS Read display appears.
4
Turn the
Rotary encoder
to select one of the
received message.
5
Press the
Rotary encoder
.
The SMS Inbox display appears.
The contents of the received message is displayed up to
140 letters.
REPLY:
Replies to the sender by return mail.
Standardized sentences can be selected
in the display (refer to “Sending a
Standardized Sentence,” page 43).
USE NUMBER: Replies to the sender by phone. The
Select display appears. Place a call by
pressing
1
(
).
RETURN:
Returns to the SMS Read display.
•
When the unit receives a message, the new reception icon appears.
•
When the message box is full, "INBOX FULL" is displayed for 2
seconds. Delete the needless mails in the cellular phone.
Calling by the address book
From your vehicle, call from the address book registered in the
portable telephone.
1
Press and hold the
Rotary encoder
for more than
2 seconds.
The Speed Dial display appears.
2
Press
7
(
RETURN
).
The Telephone menu display appears.
3
Press
2
(
PHONE BOOK
).
The Phone Book display appears.
4
Turn the
Rotary encoder
to select a receiver,
then press the
Rotary encoder
.
The Select display appears.
•
By pressing
1
(
ALPHABET DN
) or
2
(
ALPHABET UP
),
the names are listed in alphabteical order.
•
If no data is in the PHONE BOOK, "NO MEMORY" is
displayed.
Press
7
(
RETURN
) to return to the Telephone menu display.
5
Press
1
(
) to place the call.
6
To cut the call, press
2
(
). Or the call is
automatically cut in 5 seconds after finishing.
Calling by the outgoing / incoming /
absent incoming history
You can place a call to one of the last 999 calls by the outgoing/
incoming/absent incoming history.
1
Press and hold the
Rotary encoder
for more than
2 seconds.
The Speed Dial display appears.
2
Press
7
(
RETURN
).
The Telephone menu display appears.
3
Press
3
(
CALL LOG
).
The Call log display appears.
4
Press either
1
(
DIALED NUM.
),
2
(
MISSED
CALLS
) or
3
(
RECEIVE CALLS
).
DIALED NUM.:
Outgoing history list display
MISSED CALLS:
Absent incoming history list display
RECEIVE CALLS: Incoming history list display
•
If no history is registered to any of the lists, NO MEMORY is
displayed.
To return to Telephone menu display, press
7
(
RETURN
).
5
Turn the
Rotary encoder
to select a receiver, then
press the
Rotary encoder
.
The Select display appears.
6
Press
1
(
) to start call.
7
To cut the call, press
2
(
). Or the call is
automatically cut in 5 seconds after finishing.
