37
-EN
To activate your auxiliary devices:
To watch a video source, your vehicle must be parked with
the ignition key in the ACC or ON position. To do this, follow
the procedure below.
1. Bring your vehicle to a complete stop at a safe
location. Engage the parking brake.
2. Keep pushing the foot brake and release the parking
brake once then engage it again.
3. When the parking brake is engaged for the second
time, release the foot brake.
• For automatic transmission vehicles, place the transmission
lever in the Park position.
Now, the locking system for the AUX mode operation has
been released. Engaging the parking brake can reactivate
the AUX mode, as long as the car's ignition has not been
turned off. It is not necessary to repeat the above
procedure (1 through 3), of “To activate your auxiliary
devices.”
Each time the ignition is turned OFF, perform the procedure
of “To activate your auxiliary devices.”
• If you try to activate the auxiliary device while driving, the
display will show the warning-PICTURE OFF FOR YOUR
SAFETY.
1
Press
SOURCE/POWER
.
The main menu screen appears on the display.
2
Turn the
Rotary encoder
and select “AUX,” then
press the
Rotary encoder
to execute the
selection.
• If the AUX mode is not displayed on the main menu, set AUX IN to
LEVEL LOW or HIGH by following "Setting the AUX mode" (page
33).
Changer (Optional)
Controlling CD Changer (Optional)
An optional 6-disc or 12-disc CD Changer may be connected to the
IVA-D900 if it is Ai-NET compatible. With a CD Changer connected
to the Ai-NET input of the IVA-D900, the CD Changer will be
controllable from the IVA-D900.
If you connect a changer compatible with MP3, you can play CD-
ROMs, CD-Rs, and CD-RWs containing MP3 files on the IVA-D900.
Using the KCA-400C (the Multi-Changer Switching device) multiple
changers can be controlled by the IVA-D900.
See the Multi-Changer Selection section for selecting the CD
Changers (page 38).
1
Press
SOURCE/POWER
to display the main
menu.
2
Turn the
Rotary encoder
to select "CD CHG,"
then press the
Rotary encoder
.
The display changes to the CD changer mode screen.
3
When a 6 Disc CD Changer is connected;
1 Press
7
(
PAGE 1/2
).
The Function Guide display changes.
2 Press the Function buttons to select your desired disc
loaded.
The Function buttons
1
(
DISC1
) through
6
(
DISC6
)
select the discs from the first disc to 6th disc.
When an MP3 compatible CD changer is connected;
1 Press
7
(
PAGE 1/3
) twice to change the Function
Guide display.
2 Press the Function buttons to select your desired disc
among the loaded ones.
The Function buttons
1
(
DISC1
) through
6
(
DISC6
)
select the discs from the first disc to 6th disc.
Continued
7
6
5
4
3
2
1
BAND
SOURCE/POWER
Rotary encoder
