Alpine 9ZUA147, Manual

Page: 96 / 111

96
-EN
When Using the Remote Control
• When you first use the remote control, please remove the insulation
sheet in the battery case.
• Point the remote control at the remote sensor within about 2 meters.
• It may not be possible to operate the remote control if the remote control
sensor is exposed to direct sunlight.
• The remote control is a small, lightweight precision device. To avoid
damage, short battery life, operational errors and poor response,
observe the following.
- Do not subject the remote control to excessive shock.
- Do not put in a trouser pocket.
- Keep away from food, moisture and dirt.
- Do not place in direct sunshine.
Battery Replacement
Battery type: CR2025 battery or equivalent.
1
Opening the battery case
Slide out the battery cover while firmly pressing in the direction
of the arrow.
2
Replacing the battery
Put the battery in the case with the (+) indication upward as
shown in the illustration.
• Placing a battery in backwards way may cause a malfunction.
3
Closing the cover
Slide the cover as illustrated until a click is heard.
About Remote
Control Operation
WARNING
DO NOT OPERATE ANY FUNCTION THAT TAKES YOUR
ATTENTION AWAY FROM SAFELY DRIVING YOUR VEHICLE.
Any function that requires your prolonged attention should
only be performed after coming to a complete stop. Always stop
the vehicle in a safe location before performing these functions.
Failure to do so may result in an accident.