
18
3. With the dust hose attached
to the tool, you can now install
the dust bag onto the dust bag
holder.
4. Open up the hook and loop strap
and slide the hose end into bag
until the end of the bag is even
with shoulder on the hose end.
Tighten the hook and loop strap
so the strap is behind the raised
lip on the hose fitting.
5. When in use, the dust bag and
hose should lie flat on the ground. When the bag is new it will not inflate
immediately. As the pores in the bag become clogged, the bag will start to inflate.
Note: As the bag fills up and creates backpressure, the suction will decrease. When dust
is not being removed from the work surface, you should check the fan belts and/or
replace the bag.
Hook & Loop Strap
Dust Bag Hose
Shoulder
Dust Bag Holder Raised Lip
Figure-10
Dust Bag Holder and Dust Bag
Figure-11
Hose Fitting with Hook & Loop Strap Secured
Figure-12
Dust Bag