
17
With the slide cover as-
sembly open, the unit can
now be pushed up against
the wall allowing the hous-
ing to ride along the edge.
(See Figure 6: Slide Cover
Assembly Open). With the
slide cover assembly open,
extra care should be taken
to hold the unit flat to prevent
grooving along the wall.
Edge grinding will work best with our 5” grinding wheel. This configuration allows you about
1mm clearance between the grinding wheel and the wall.
DUST HOSE AND BAG INSTALLATION
1. Install the back-flow preventer
assembly to the Ecogrinder
exhaust port, with the dust gate
in the upright position, so flap
will close when the tool is turned
off.
2. Slide the dust hose onto the
backflow preventer assembly,
twist and turn until the hose is
up against the shoulder of the
back-flow preventer assembly.
Dust Gate
Figure-8
Back-Flow Preventer w/Dust Gate
Dust Hose
Back-flow Preventer
Assembly Shoulder
Figure-9
Back Flow Preventer Assembly and Dust Hose
Figure-7
Edge Grinding / 1mm Wall Clearance
1mm