13
8. Hold the unit tightly to prevent it from walking, and remove the high spots in the work
surface from the top down.
9. This grinder is designed to be used dry, if the surface is wet the dust will not be able
to pass through the fan and a breakdown will result.
ECOGRINDER OPERATION
CAUTION!
Always be sure that the tool is switched off and unplugged before adjusting or checking
function on tool.
MAIN CONNECTION
Connect only to single-phase AC current supply and only to the main voltage specified on
the rating plate.
SWITCHING ON AND OFF
CAUTION!
Before plugging in the tool, always check the working voltage and be sure that the voltage
specified is on the name plate. Before plugging in the tool, always check to see that the
trigger switch actuates properly and returns to the “OFF” position.
Switching on and Off:
Intermittent Use:
Switching on: Press the trigger switch
Switch off: Release the trigger switch
Continuous Use:
Switching on: Press the trigger switch and
then the locking button, then release the
trigger switch
Switching off: press the trigger switch, then
release
On/Off Trigger Switch
Figure-3
Locking Button
On/off Switch and Locking Button
