
11
ADDITIONAL PRECAUTIONS FOR USING
THE ECOGRINDER
In addition to the general safety notes described on the preceding pages, please read
and observe the following precautionary notes before using the Ecogrinder.
DANGER!
SAFETY ADVICE
• Please note safety instructions on Page 3-5.
• Do not pierce the motor housing as this could damage the double insulation.
• Always remove plug from the outlet before making any changes to the settings or
performing maintenance.
• Ensure the tool is switched off prior to plugging in.
• Keep power cable clear from working area of the machine. The power cable should
always lead away from you and behind the operating area.
• Before use, check the machine, cable and plug for any damages or material fatigue.
Only authorized service agents should perform repairs.
• After switching off, the machine will not idle down immediately. Allow the machine to
come to a complete stop before putting it down.
• Always wear safety glasses and ear protection when working with this machine. It
is further recommended to wear safety gloves, apron, as well as sturdy non-slipping
shoes.
• Only use grinding wheels whose permitted speed is at least as high as the highest
no-load speed of the machine.
• Be sure wheels fit tool properly and securely. Do not modify the tool to force fit the
wheel. Do not remove wheel cover.
• Check grinding tools before use. The grinding wheel must be properly mounted and
turn freely. Perform a test run for at least 30 seconds without any load. Do not use
damaged, out of round or vibrating grinding tools.
• Immediately switch off the machine in case of considerable vibrations or if other
malfunctions occur. Check the machine in order to find out the cause.
• Always use and store the grinding wheels according to the manufacturer’s instructions.
The flange bolt must be tightened before starting to work with the machine.
• The work piece must be secured if it is not heavy enough to prevent movement.
• Do not use emery wheel.