Alpha Technologies GSM-VarioBell, User Manual

Page: 4 / 65

3
a. From numbers saved in phone book on the SIM
card only
b. From any telephone number .
2. By code
–
•
during voice communication (incoming as same as
outgoing call) . The 1 digit code by DTMF might be
dialed by called party for relay activation ( for
preprogrammed time). For each relay you can
program different code.
•
When keypad module is connected it is possible
selected relay (not during call!) activate by code from
keypad. The activation might be limited also by date,
time, day of the week , access numbers, etc..
•
For relay activation by code (opening) might be setup
sending SMS with date, time and number ( or code)
of opening
3. By SMS
– you can remotely switch ON/OFF selected
relay or activate relay for certain time mention in SMS.
Relays might be controlled only from preprogrammed
numbers at GSM-VB SIM card.
4. Camera mode
– selected relay is ON by picking up the
call and it is OFF by hanging up the call.
5. Lighting mode
– selected relay is ON by picking up
the call and it stays ON for preprogrammed time after
hang up.
6. Button mode
– selected relay is ON after button press
and stays ON for preprogrammed time.
1 programable input :
1. SMS sending
„ALARM ON“ to preprogrammed number
when input is short circuit against ground. SMS
„ALARM OFF“ to next preprogrammed number when
input is disconnected. It might be programmed 1
number only (ON or OFF). Then is send 1 SMS only up
selected status.
2. opening detection . When input is activated during call
(for example by gate ( door) opening ) the GSM
–Vario