Alpha Technologies GSM-VarioBell, User Manual

Page: 28 / 65

27
setting. Initially by the
SMS „READ PAR“ read the current
setting to your mobile phone.
6. By editor of SMS messages change at received SMS word
READ to WRITE as well as adjust parameters based on
your needs. Such adjusted SMS send back to GSM-VB as
a reply. The parameters will be setup.
A) Parameters setting by PC and program GSMVBellset
1. Connect MiniUSB cable to PC as same as to
programming module
– green LED must light on at the
module. During first usage USB driver might be installed.
USB driver is available on the attached CD or on a
website.
2. Insert connector of programing module into GSM-VB
(via picture). On
programming module must
light on red LED (It is
flashing same way like
yellow LED on GSM-VB)
3. Run program GSMVBellset and setup appropriate COM
port
4. Program controls GSM-VB connection. After that display
GSM signal strength and voltage on GDI (back up ACU).
Now you can program.