Alpha Technologies GSM-VarioBell, User Manual

Page: 56 / 65

55
- by ringing activate relay 1 and relay 2
- from this number are automatically received the calls
ADMIN2
to
ADMIN7
- by ringing activate relay 1 and relay 2
- By SMS activate relay 1 and relay 2
- By SMS read status and numbers in phone book
- By SMS edit numbers and names on SIM card
- By SMS control other features (AT commands)
- By SMS setup parameters
- From those numbers are automatically pick up calls
ADMIN1 The same as ADMIN2 to ADMIN7 and moreover:
- to this number are sent reports by SMS with list of opening by
ringing
- to this number is sent SMS with info about low ACU battery level
(option)
BXX-Y Phone number of button BXX (where XX is button number 01 to 85),
dialed in order Y (where Y=1 to 7). In case Y>1, this number is called
when previous number from line BXX is busy, not reachable or
doesn’t pick up the call
- by ringing activate relay 1 and relay 2
- from number are automatically received the calls
MXXXX-Y
Phone number of memory XXXX (various 10 digits number) dialed
from keypad in order Y (where Y=1 to 7). In case Y>1, this number is
dialed when previous number from line MXX is busy, not reachable
or doesn’t pick up call
- by ringing activate relay 1 and relay 2
- from number are automatically received the calls
CXXXXC
Code parameters XXXX (XXXX is various 10 digits number ) dialed
from keypad
Mode 0: simple relay closing after code dial
A#0
A – relay from which is code dialed [1,2]
Mode 1: relay closed for setup days in week only