Alpha Technologies GDI Bell, User And Programming Manual

Page: 30 / 40

29
ADMIN2
to
ADMIN7
- by ringing in activate relay 1 and relay 2
- Activate relay 1 and relay 2 by SMS
- Read GDI status and numbers in phone book by SMS
- Edit name and numbers on SIM card by SMS
- Control next features by SMS ( AT commands)
- Setup parametres by SMS
- calls are automatically received from this number
ADMIN1 The same like ADMIN2 to ADMIN7 and moreover:
- to this number are sending reports by SMS includes list of relay
activation by ringing in
- to this number is sending SMS with message abou low battery level
(option)
Various
name - relay1 or relay2 activated by ringing in
- calls are automatically received from this number
ALARMON - to this number is send SMS „ALARM ON“ when input is activated
against ground
ALARMOFF - to this number is send SMS „ALARM OFF“ when input is
deactivated
VER - firmware version in GDI - just info – do not adjust!
PARGDI - GDI parametres
A#B#C#D#E#F#G#H (default 4#4#0#0#1#5#0#0)
A – microphone sensitivity [1-7]
B – speaker loudness [1-7]
C – incoming calls: 0 – all rejected (ringing in relays activation)
1 – accept from numbers on SIM card only
2 – accept all
D – record who opened by ringing in: 0 – deactivated
1 – activated
E – time setup from GSM network: 0 – deactivated
1 – activated
F – signalization: 0 – OFF
1 – tones
2 – ringing of incoming call
4 – voice messages
all combination available – for ex. All is ON = 7