Alpha Technologies GDI Bell, User And Programming Manual

Page: 13 / 40

12
1. During first setting when SIM doesnt contents any ADMINx
name is neccessary such number insert to SIM by SMS with
command INIT. SMS you can send from various number.
When SIM already contents even one number under name
ADMINx the command is ignored.
2. When you need control relay eventually setup GDI from
next ADMIN numbers perform following: from mobile phone
with ADMINx number send progressivelly SMS to GDI with
numbers of next ADMINx in SMS format: WRITE ADMIN2
+420xxxxxxxxx (WRITE ADMIN3… etc.)
3. From mobile phone with numbers ADMINx send
progressively SMS to GDI with numbers which should be
dial after button press, SMS format: WRITE ABUTTON1
+420
xxxxxxxxx (WRITE BBUTTON1… etc..)
4. Up your needs send next SMS with other parametres for
opening by ringing, SMS alarm sending , etc..
5. Setup parametres GDI (via table). Parametres you can
setup individually for each parametr appropriate SMS.
When you need setup more parametres simoultaneously we
recommend use SMS for batch setting. By SMS „READ
PAR“ read firstly current setting to your mobile.
By editor of SMS messages change at received SMS word
READ to WRITE as same as adjust parametres up your
needs. Such adjusted SMS send back to GDI as reply. The
parametres will be setup.
A) Setting by PC through USB via GDIset ( optional)
1. Connect MiniUSB cable to PC as same as to
programming module
– green LED must light on at the
module. During first usage
USB driver might be
installed. USB driver is
available at attached CD.