Alpha Technologies GDI Bell, User And Programming Manual

Page: 4 / 40

3
Relays might be controlled only from preprogrammed
numbers at GDI SIM card.
4. camera mode
– selected relay is ON by picking up the
call and it is OFF by hanging up the call.
5. lighting mode
– selected relay is ON by picking up the
call and it stays ON for preprogrammed time after hang
up.
6. button mode
– selected relay is ON after button press
and stays ON for preprogrammed time.
1 adjustable input
:
1. SMS sending
„ALARM ON“ to preprogrammed number
when input is short circuit against ground. SMS
„ALARM OFF“ to next preprogrammed number when
input is disconnected. It might be programmed 1
number only (ON/OFF). Then is send 1 SMS only up
selected status.
2. opening detection . When input is activated during call
(for example by gate ( door) opening ) the GDI
generates into a call 3 short beeps for time of input
activation.
Voice signalling of different status . Up settings might be
different status signalling by voice . ( language adjustable).
When is voice signalling presented during a call it is hearable
on both sides of connection (for example „open“)
Detection of start / restart . GDI indicates the start device
(power) switch relay1 on 7s. This function can be used for
example to automatically open after restoration of power
supply, remote reboot any device (ringing) with automatic
restart after power is restored, etc
Installation