Alpha Technologies GDI Bell, User And Programming Manual

Page: 24 / 40

23
Table of SMS commands
command ( SMS) Functionality Des
SM
S
m
ig
ht
be
sent
f
ro
m AD
M
INx
nu
mb
er
s
o
nly
READ STAT Reading of GDI status (firmware, time,
relays status etc.)
READ PAR Reading of all setup parametres
READ JMENO Reading of phone number for NAME
CLR JMENO Erasing phone number for NAME
INIT 420cc…c Inicialization – first GDI setting –
parametres you can programm from number
420cc..c
SET REL1 ON Activation relay 1
SET REL1 OFF Deactivation relay 1
SET REL1 ON xx Activation relay1 for xx minutes
(xx=00 -99)
SET REL2 ON Activation relay 2
SET REL2 OFF Deactivation relay 2
SET REL2 ON xx Activation relay 2 for xx minutes
(xx=00 -99)
WRITE JMENO +420cc…c Saving of phone number under NAME
WRITE PAR VOLIN:x Saving of microphone loudness
[x=1-7]
4
WRITE PAR VOLOUT:x Saving of speaker loudness
[x=1-7]
4
WRITE PAR INCALL:x Processing of incoming call: x:
0 – calls rejected (ringing in)
1- calls received from SIM only (list)
2 – all calls received
0
WRITE PAR WRCALL:x Sending SMS with the numbers of which
was to open up
0 – deactivated
1 - activated
0