Alpha Technologies GDI Bell, User And Programming Manual

Page: 25 / 40

24
WRITE PAR TMGSM:x Time setup up GSM network x:
0 – OFF
1 - ON
1
WRITE PAR TONE:x Setting of acoustic signalization x:
0 – switch OFF
1 – signalling by service tones
2 – ringing of incoming call is ON
4 – signalling by voice messages
and combination – for ex. 7 – all is ON
5
WRITE PAR INPMOD:x Input mode
x=0 – deactivated
x=1 – beeps into call (opening indication)
x=2 – during activation/deactivation sends
SMS
0
WRITE PAR WAIT:xx Waiting to dial the next number on the list
xx – 10 to 90 sec. (by dozens)
20
SM
S
mig
ht
be
sent
f
ro
m AD
M
INx
nu
mb
er
s
o
nly
WRITE PAR RL1COD:y Code for relay1 activation during call
y= 0-9
5
WRITE PAR RL1MOD:x Relay 1 modes
x=0 – control by SMS
x=1 – switch mode (ringing in only from
SIM phone number or by code)
x=2 – camera mode (activated by pick up,
deactivated by hang up)
x=3 – lighting mode (activated by pick up
and stays ON for „activation time“
after hang up
x=4 – activated for „activation time“ after
button press
x=5 - switch mode all (ringing in from all
phone number or by code)
1