Page
12
to
52
Removing the TRI POWER X33 HE from the pallet
CAUTION! TO AVOID HARMING PEOPLE AND/OR DAMAGING THE EQUIPMENT, FOLLOW
CAREFULLY THE FOLLOWING INSTRUCTIONS.
SOME OF THESE INSTRUCTIONS NEED TO BE CARRIED OUT BY TWO PEOPLE.
Cut the straps and remove the
cardboard box by sliding it upwards.
Remove the packaging material.
Remove the accessory box.
NOTE: the accessory box can be either
inside the packaging, or behind the USP
door.
Remove the 2 brackets securing the TRI POWER X33
HE to the pallet by unscrewing the screws marked A
and B in the figure.
The previously removed brackets can also be used as slides. Secure the slides to the pallet by using the
type A screws, making sure they are aligned with the wheels.
