4
INSTALLATION
Unpacking and Inspection
Before installation, please inspect the unit. Be sure that nothing inside the package is damaged. You should
have received the following items inside of package:
Inverter unit Software CD Manual RS-232 cable Parallel communication cable
Current sharing cable
NOTE:
Parallel communication cable and Current sharing cable are only used for parallel mode installation.
Follow instructions in
Appendix I
to install a system with multiple units.
Preparation
Before connecting all wirings, please take off bottom cover by removing two screws as shown below.
WARNING!
Make sure not to damage / disconnect the cables that link the cover with the inverter case.
Mounting the Unit
Consider the following points before selecting where to install:
Do not mount the inverter on flammable construction materials.
Mount on a solid surface
Install this inverter at eye level in order to allow the LCD display to
be read at all times.
The ambient temperature should be between 0°C and 55°C to
ensure optimal operation.
The recommended installation position is to be adhered to the wall
vertically.
Be sure to respect the clearances shown in the diagram at the right
to guarantee sufficient heat dissipation and to have enough space
for removing wires.
SUITABLE FOR MOUNTING ON CONCRETE OR OTHER
NON-COMBUSTIBLE SURFACE ONLY.