63
3.
Installation and Operation
PYLONTECH
After configuration, please install LCD panel with inverter and Lithium battery with the following steps.
Step 1. Use custom-made RJ45 cable (P/N: SPC-COMM) to connect inverter and Lithium battery.
Note
: connect the SPC-COMM cable in the RS-485 port of the battery
Note for parallel system:
1.
Only support common battery installation.
2.
Use one custom-made RJ45 cable (P/N: SPC-COMM) to connect any inverter (no need to connect to a
specific inverter) and Lithium battery.
Simply set battery type of this inverter
to “PYL” in LCD program 5
.
The remaining inverters are set as
“USE”.
Step 2. Switch on Lithium battery.
Step 3. Press more than three seconds to start Lithium battery, power output ready.
Step 4. Turn on the inverter.
Step 5. Be sure to select battery type as “PYL” in LCD program 5.