10
Remote Display Panel Installation
The LCD panel can be removable and installed in a remote site with an optional communication cable. Please
follow below steps to implement this remote panel installation.
Step 1.
Loosen the screw on the bottom of LCD panel and push down the panel from the bottom case. Then,
pull out the cable from the remote communication port. Be sure to screw back the fixing plate to the inverter.
Step 2.
Drill two holes in the marked locations with two screws as shown below chart. Place the panel on the
surface and align the mounting holes with the two screws. Then, use one more screw on the top to fix the panel
to the wall and check if the remote panel is firmly secured.
Note:
Installation to the wall should be implemented
with the proper screws. Refer chart for recommended
spec of screws.
M3
Ø5-Ø9