9
We reserve the right to modify technical specifications without prior notice.
83050700aUK – Translation of the operating manual
© Alpha-InnoTec GmbH
complete the following first:
check the delivery for outwardly visible signs of
damage…
check to make sure that the delivery is complete…
Any defects or incorrect deliveries must be
reported immediately.
note.
note the unit model.
“Technical data / scope of delivery” overview.
funCtionally neCessary aCCessories
Important
only use the manufacturer's original accessories.
If the unit is to be used for heating water, a 3-way switch-
ing valve must be installed. This is not included with the
unit and must be ordered separately.
Installation
The following applies to all work to be done:
note.
Always comply with the relevant local accident
prevention regulations, statutory regulations,
guidelines and directives.
note.
note the sound information for the respective
model.
“Technical data / Scope of delivery” overview,
“Sound” section.
installation room
Important
Install the heat pump inside buildings only.
The installation room must be frost-free and dry. It must
meet the requirements of En 378. It must also fulfil rel-
evant local regulations.
dimensioned drawing and installation plan for
the respective unit model.
transport to installation loCation
Always comply with the following safety information
during transport:
WarnIng!
several people are required to transport
the unit. take into account the weight of
the unit.
“Technical data / Scope of delivery” overview,
“General unit data” section,
CautIon!
Wear safety gloves.
