Alpha-InnoTec WWC100HX, Operating Manual

Page: 55 / 60

55
820522il FAZ-Wp AIT © Alpha-InnoTec GmbH
The heating system is fi lled and pressure tested; the circulating pumps function properly.

no

yes
The heat source system is completed, inspected and oK.

no

yes
The heating circuit, heat source system and circulating pumps have been bled.

no

yes
All volume fl ows and water fl ow rates have been checked and are oK.

no

yes
checked on: .............................................................................
by: ............................................................................................... Signature: ........................................................................................
The following applies in Germany and Austria:
Send this general checklist
along with the completed report
to the factory customer service.
Sending the general checklist and the completion report also serves as a request for a technician authorized by the manufacturer to
commission your heat pump.
for preparation of the Completion report
The general checklist is intended as an aid for the installation and assembly personnel. It makes no claim to be exhaustive.
nevertheless, all items must be checked carefully for compliance.
Heat source air
channels closed and sealed

yes
minimum cross-section is met

yes
Weather protection screen installed

yes
Rotary fi eld of fan

o.K.
Heat source brine / heat source water
Heat source volume fl ow
1
)
2
)

o.K.
motor protection setting A
Rotary fi eld of heat source circulating pump

o.K.
Heat source fi lled, air-free and sealed

yes
Brine
Frost protection inspected down to °c
Type of anti-freeze agent (please enter)
Water
Water quality oK 3 )

yes
Well units

yes
other heat source

yes
Heat pump
Installation of condensate hose

o.K.
decoupled from structure

yes
vibration decouplers of heating circuit and
heat source connections mounted

yes
solar heat system

no

yes
Solar heat system fi lled, air-free and sealed

yes
Frost protection inspected down to °c
Type of anti-freeze agent (please enter)
Hydraulic integration
Integration of the heating heat pump into the
heating system corresponds to the planning
documents

yes
Shut-off devices are correctly set

yes
Heating
volume fl ow
1
)
2
)

o.K.
Heating system designed for maximum °c
Heating system fi lled, air-free and sealed

yes
low temperature heating

yes
High temperature heating

yes
All heating circuits can be opened

yes
Forward fl ow tank

yes
Return fl ow tank

yes
Separating tank

yes
Additional heating kW
Domestic hot water
Type: Hot-water tank (please enter)
4
)
with heat pump

yes
Request with thermostat

yes
Request with sensor

yes
volume fl ow 1 ) 2 )

o.K.
connections sealed

yes
Exchanger area m²
nominal contents l
Electric fl ange heating kW
Control / electrical connection
All electrical components are permanently
connected in accordance with the installation
and operating instructions and the require-
ments of the electricity supply company (not a
construction site connection)

yes
clockwise rotating fi eld observed

yes
All sensors are present and correctly installed

yes
1) checked with specifications. • 2) The minimum volume flow must be
ensured through uncontrolled circulating pumps with constant volume
flows.
• 3)
Report of water analysis must be submitted
. • 4) no functional
guarantee is given if tanks are used which are not made by Alpha-
InnoTec GmbH or are not approved for the heat pump type..
General checklist heat pump
We reserve the right to modify technical specifications without prior notice.
83050700aUK – Translation of the operating manual
© Alpha-InnoTec GmbH
General checklist