21
We reserve the right to modify technical specifications without prior notice.
83050700aUK – Translation of the operating manual
© Alpha-InnoTec GmbH
Then, beginning on one side, latch the
lugs on the
masking plate
from the bottom up
into the slots
provided in the front panel…
then, on the opposite side, latch the
lugs on
the masking plate
from the bottom up
into the
slots provided in the front panel…
Finally, press the upper latching lugs of the masking
plate into the slots provided in the front panel.
operating manual for the heating and heat pump
controller, “qualified technician” version, “Web
server” section.
If this network cable is available, insert the
network cable's RJ-45 connector into the left
socket of the control panel.
note.
The network cable can be exchanged at any
time. In order to be able to connect it, the
screen must first be removed.
Installation and removal
of the screen
installing the sCreen
note.
The masking plate is provided in the as delivered
unit so that the control panel is inserted in the
upper recesses of the front panel.
If the control panel has been inserted in the
lower recesses of the front panel, you must first
remove the masking plate's dummy cover and
then reinsert it above the logo.
Screen at time of delivery:
1 Recess for control panel
2 logo
3 dummy cover
First, insert the masking plate
below
in the slots
provided in the front panel…
