4
Subject to technical amendments without notice | 83059700iUK – Translation of the original operating manual | ait-deutschland GmbH
1.4 Contact
Addresses for purchasing accessories, for service
cases or for answers to questions about the device
and this operating manual can be found on the internet
and are kept up-to-date:
●
Germany: www.alpha-innotec.de
●
EU: www.alpha-innotec.com
2 Safety
Only use the device when it is in flawless technical
condition and only use it as intended, safely and aware
of the hazards, and follow this operating manual.
2.1 Intended use
The device is solely intended for the following
functions:
●
Heating
●
Domestic hot water preparation (option, with
accessories)
●
Cooling, reversible
►
Proper use includes complying with the operating
conditions (
"Technical data / scope of supply",
page 17) as well as the operating manual and
any other applicable documents.
►
Observe local regulations during use: laws,
standards, guidelines, directives.
All other uses of the device are not as intended.
2.2
Personnel qualifications
All instructional information in this operating manual is
intended solely for qualified, skilled personnel.
Only qualified, skilled personnel are able to carry out
the work on the unit safely and correctly. Interference
by unqualified personnel can cause life-threatening
injuries and damage to property.
►
Ensure that personnel are familiar with local
regulations, especially those on safe and hazard-
aware working.
► Allow qualified personnel with "electrical" training
only to carry out work on the electrical and
electronic systems.
► Only allow qualified, skilled personnel to perform
any other work on the system, e.g.
●
Heating installers
●
Plumbers
●
Refrigeration plant manufacturers (maintenance
work)
During the warranty and guarantee period, service
work and repairs may only be carried out by personnel
authorised by the manufacturer.
2.3 Personal protective equipment
There is a risk of cutting your hands on sharp edges of
the device.
►
Wear cut-resistant protective gloves during
transport.
2.4 Residual risks
Electric shock
Components in the device are energised with life-
threatening voltage. Before opening the device
panelling:
►
Disconnect the device from the power supply.
►
Protect the device from being switched back on
again.
Injury due to moving parts
►
If the heat pump is operating, the air grille must
be fitted.
Injuries due to high temperatures
If desuperheating is used, very high temperatures can
arise at the desuperheater and the desuperheater
lines. Contact can result in burns.
►
Do not touch the desuperheater or its lines when
operating or afterwards.
Injuries and environmental damage due to
refrigerant
The unit contains harmful and environmentally
dangerous refrigerant. If refrigerant leaks from the unit:
1.
Switch off unit.
2. Notify authorised after sales service.
