15
We reserve the right to modify technical specifications without prior notice.
UK830504/210627
© Alpha-InnoTec GmbH
Insert the wall duct into the masonry. This can be
done during the structural construction phase (by
means of sealing)…
notICe.
Mount the wall ducts 1 cm above the
finished outer facade.
1 masonry of the house exterior
2 Insert the wall duct in the
masonry (1 cm above the
finished outer facade)
or retrofit (using foam in the masonry):
1 finished outer facade
notICe.
Wall ducts fix wall openings, help avoid
cold air transmission in the masonry as
well as assist in the assembly of weather /
rain guards and wire mesh grilles
air duCts assembly
proceed as follows:
Remove the parts necessary for the assembly of the
air duct(s) from their respective boxes…
The interlocking of the air ducts is carried out
as described in the section – entitled “Wall
duct(s) assembly”.
seCuring the air duCt into the wall duCt
proceed as follows:
pull the roll seal included with delivery over the end
of the air duct…
push this end of the air duct into the wall duct.
1 wall duct
2 air duct
3 roll seal
4 betonite waterstop tape (attach
only after assembling the
unit's connection fastener)
Summary of Contents for LWC 100
Page 56: ......
