background image

 

 

 

 

 

ADM-XRC-5T2-ADV User Manual 

 

 

ADM-XRC-5T2-ADV User Manual 

1. 

Introduction 

The ADM-XRC-5T2-ADV is a high performance PCI Mezzanine Card (PMC) designed for 
supporting development of applications using the Virtex-5 FF1738 Family of FPGA Devices.   

 

Virtex5 LXT: LX110T, LX155T, LX220T or LX330T  

 

Virtex 5 SXT: SX240T 

 

Virtex 5 FXT: FX100T, FX130T, or FX200T 

The card uses an FPGA PCI bridge developed by Alpha-Data supporting PCI-X and PCI.  A 
high-speed multiplexed address/data bus connects the bridge to the target (user) FPGA. 

The card can also be fitted with a Primary XMC connector to provide high-speed serial links 
to the user FPGA. 

The board is an application specific version of the ADM-XRC-5T2 and features JPEG2000 
video compression capabilities and multi-gigabit serial links using 2 FCN x4 Fibre Channel 
connectors.  

1.1. 

Specifications 

The ADM-XRC-5T2-ADV supports high performance PCI-X / PCI operation without the need 
to integrate proprietary cores into the FPGA. 

 

Physically conformant to VITA 42 XMC Standard 

 

Physically conformant to IEEE P1386-2001 Common Mezzanine Card standard (with 
XMC connector removed) 

 

8-lane PCIe / Serial RapidIO connections to User FPGA (via XMC connector) 

 

8 additional MGT links to User FPGA.  (via front-panel) A cost-effective solution to 
applications requiring high-speed data communications such as Infiniband TA, 10G 
Ethernet, 4x Fibre Channel and others. 

 

High performance PCI and DMA controllers 

 

Local bus speeds of up to 80 MHz 

 

Up to four independent banks of 64Mx32 DDRII SDRAM  (1GB total) 

 

Two banks of 2Mx18 DDRII SSRAM  (8MB total) 

 

User clock programmable between 31.25MHz and 625MHz 

 

Stable low-jitter 200MHz clock for precision IO delays 

 

User front panel gigabit serial I/O – 8 lanes in 2 FCN connectors 

 

4 JPEG2000 codecs (Analog Devices ADV212) which can be operated individually or 
in 2 tandem banks to provide compression /decompression of video data 

 

User rear panel PMC connector with 32 free IO signals 

 

Programmable I/O voltage rear interfaces 

 

Supports 3.3V PCI or PCI-X at 64 bits 

Version 1.0 

Page 1

 

Summary of Contents for ADM-XRC-5T2-ADV






















Reviews: